U9264Q 400G PM4 Error tester
U9264Q 400G PM4 Error tester
Performance Features:
1、 Signal encoding mode:NRZandPAM4, Can be automatically NRZAtPAM4Free switching between signals.
2、 Eight-channel synchronous output for testing6.144G、10G、40G、100G、200Gand400GProducts, error code tests can be independently tested or eight-way synchronously.
3、 Supports continuous error detection and timed error monitoring.supportKP4/KR4 hardwareFECFunction。
4、 NRZSupport rate:6.144、10.3125、25、25.78125、26.5625、28.05 Gpbs.
5、 PAMSupport rate:14.0625、26.5625、28.9 GBd.
6、 NRZSupported code types:PRBS7、9、10、11、15、23、PRBS31，User Defined.
7、 PAM4Support code type: PRBS11Q、13Q、15Q、20Q、23Q、31Q、49Q、58Q、SSPRQ，JP03A、JP03B、User Defined.
8、 The clock frequency is default4Dividing frequency, support1/4,1/8,1/16,1/32,1/64,1/128Frequency ratio.
9、 Communication method:USBchangeHID. No driver required, PCThe host computer software communicates with the device, sets the bit error instrument and tests the bit error rate.
Technical parameters
No. | parameter | Minimum | typical | maximum | unit |
1 | Signal encoding mode | NRZ/PAM4 | |||
2 | Data rate | 6.144 | 6.144、10.3125、20、25、25.78125、26.5625、28.05 | 28.05 | Gbps |
3 | Code type | PRBS7、PRBS9、PRBS11、PRBS13、PRBS15、PRBS16、PRBS23、PRBS31，USER\ PRBS13Q、SSPRQ、JP03A、JP03B。 | |||
4 | Rise and fall time (20% to 80%） | 14 | 35 | pS | |
5 | Pattern reversal | Automatic reversal of the signal at the receiving end | |||
6 | Signal output amplitude (single-ended) | 200 | 800 | 1000 | mV |
7 | 25GData output jitter (RMS） | 500 | 700 | fs | |
8 | Data input and output interface | difference,ACcoupling,50Ohmic impedance, mother2.92mm SMA | |||
9 | Clock output | 0.2 | 6.64 | 13.28 | GHz |
10 | Data signal input sensitivity(Single-ended) | 50 | mVpp | ||
11 | Data output eye diagram intersection pointNRZ | 49 | 50 | 52 | % |
12 | PAM4Eye height (each eye height) | 80 | 110 | 200 | mV |
13 | PAMEye chart linearity | 0.95 | 0.98 | 1 | |
14 | Operating temperature | 10 | 25 | 50 | °C |