U9264A 100G Error meter
U9264A 100G Error meter
Overview
U9264Afor100G productError tester.It can be used for the research and development and production testing of optical devices, high-speed cables, optical modules and communication systems.support9.953Gbps~14.5Gbpsas well as 25-29Gbps BetweenMultiplerate.
application
l Suitable for various types of optical modules (QSFP28,CFP2,CFP4,SFP28,SFP+,QSFP+,CFP） and subsystem errors Code test
l Suitable for error tests of various active, passive cables and active fibers
l Can be used as10G，100GThe signal source of the test platform
characteristic
l support9.953Gbps~14.5Gbpsas well as 25~29Gbps BetweenMultiplerate；
l Integrated4programmable code generators and4An error detector；
l Internal integrated clock module；
l Integrated clock recovery unit of error detector；
Specifications
parameter | Minimum | typical | maximum | unit | Remark |
General parameters | |||||
Power supply voltage | 100 | 220 | 240 | V | AC power,50-60HZ |
Power consumption | 20 | W | |||
Operating temperature range | 0 | 55 | ℃ | ||
External dimensions | 235 x 55 x 320 | mm | |||
Error detector（ED） | |||||
Input level range | 100 | — | 1200 | mVppd | Differential input, AC coupling |
Input rate range | 9.953 | — | 29 | Gbps | |
100 | ohm | difference | |||
Connector model | SMA | Difference, front panel | |||
Supported code types | PRBS 2n-1, n=7, 9, 10, 11, 15,23, 31, Up to 20 bits/Ch, user defined | rate9.953~14.5Gbps | |||
PRBS 2n-1, n=9, 15, 31 | rate25~29Gbps | ||||
Programmable code generator（PPG） | |||||
Output level range | 200 | — | 1100 | mVppd | Differential, AC coupling |
Output rate range | 9.953 | — | 29 | Gbps | 9.953~14.5 / 25~29Gbps |
loseoutimpedance | 100 | Ohm | difference | ||